SKIMPLAST LIQUID PASTE LP640 is a smooth skim paste rendering paste to be mixed with cement for ceilings, exterior and interior walls. It is a product for repairing surface defects in concrete or render. A smooth surface is attained by eliminating imperfections such as grooves, seams and fine cracks.

CUSTOMER BENEFITS

SKIMPLAST LIQUID PASTE offers the following advantages:

• Can be applied thinly up to 0.5mm to 4mm without flaking saving bigger cost on plastering works.
• A non toxic material resistant to ultraviolet rays and to wind-driven rain.
• No water needed
• Excellent trowelability for applicators
• Excellent white smooth finish

RECOMMENDED FOR:

• Correction of uneven concrete surfaces such as: interior and exterior walls and ceilings, formed concrete walls and pre-cast panels.
• Patching and repair of cracks, pinholes and dent gaps.
• Serves as filler to honeycomb of concrete slab, ceiling, columns and beams.

SURFACE PREPARATION

Surfaces must be structurally sound and thoroughly clean. Remove loose materials, dust, dirt, oil, laitance and other contaminants. All surfaces must be damped down with clean water just prior to application of SKIMPLAST LIQUID PASTE LP640.

APPLICATION

• Mix 1 part of SKIMPLAST LP640 with ½ to 1 part cement.
• Apply small quantities of SKIMPLAST Liquid Paste mixed with cement with stainless steel float.
• Two separate coats must be applied for a successful resurfacing (First layer as primer)
• Allow 3 hours at normal temperature between coats. Pre-covering curing time 24-48 hours.
• Allow 7 days curing

SEALPROOF NON-SHRINK CEMENTITIOUS GROUT 8008 is a non-shrink, cement-based, high strength developing grout, which is specially formulated for use in critical grouting operations where positive expansion and non-staining characteristics are required.

Application areas

• Machinery base plates
• Gaps between base plates
• Joints between precast panels
• Bridge bearings
• For filling of precast joints and tie holes with adjustable consistency
• For repairing damaged structural elements by placing within the formwork

Advantages

• Ease of applications
• Positive expansion to ensure effective contact and support
• Minimal downtime
• Elimination of site batching errors
• High early strength and low permeability
• Elimination of staining or deterioration
• Chloride-free permitting use in contact with reinforced steel

SEAPROOF ECM-801 Epoxy Cement Mortar is a three [3] component cementitious epoxy modified self leveling for floor topping applications. It is generally used as a repair and maintenance of concrete floors and leveling of patching concrete surfaces, both unfinished and after grinding of surface imperfections.

Product Applications

As a self-covering and self-leveling topping of 1.5-3mm thickness for :

• Repair and Maintenance of Roads & Bridges
• Leveling of patching concrete surfaces
• Formulated for cementitious, mineral based substrates
• Self smoothing toppings as a substrate for synthetic floor coating
• Floor toppings beneath epoxy floor coatings
• Can be used as a patching and repair mortar for surfaces to be coated w/ epoxies

Product can also be used as a temporary moisture barrier (2mm-3mm thick) for a variety of top coats like epoxies, polyurethanes & CRB floors.

Product Characteristics

• Excellent adhesion to damp concrete
• Excellent mechanical and wear resistance properties
• Excellent thermal shock resistance
• Solvent Free system
• Excellent Cohesion Property over a variety of top coats
• Economical in use and easy to apply
• Good flow ability
• Waterproof
• Excellent Water Permeability Properties
• Resistance to grease and oils