SEALBOND 515-MG
EPOXY MACHINE GROUT
SEALBOND EPOXY MACHINE GROUT (515-MG) is 100% solids Epoxy resin, specially formulated for grouting applications with high mechanical and adhesive strength. It has a lower viscosity, which cures to a material superior to concrete in tensile strength, compressive strength, and chemical resistance.
APPLICATION
- used to secure reinforcing rods, and tie rods.
- used for anchoring bolts of equipment.
- used for setting or installing heavy machinery, building columns and dowels.
- used for repairing concrete foundation which have been cracked or spalled, thru pressurized epoxy injection and grouting process.
SURFACE PREPARATION
- Remove all deteriorated concrete, dirt, grease and any bond inhibiting material.
- Sweep or if necessary blow clean with an air compressor.
- Surface must be dry.
MIXING AND APPLICATION
- Stir separately Component-A and Component-B of SEALBOND EPOXY 515-MG using electric drill or manual mixer.
- Pre-measure enough quantities of resin, hardener and fillers (clean, dry silica sand) to be used.
- Mix thoroughly resin with fillers and then the hardener. Mixing Ratio of epoxy is 2 parts by volume of Component-A to 1 part by volume of component-B. Ratio of filler to epoxy admixture is 1 part by volume of Epoxy Admixture to 1.0-1.5 gallons of filler depending on the consistency. Any change from the recommended proportion will affect its quality. Scrape the bottoms, sides and corners of the container to ensure complete and full blending. Prepare only enough quantities that can be used within the pot-life period. Do not delay application.
- Install equipment by embedment, modern rail, or sole plate-mounting methods.
PRECAUTION
Keep covers tightly closed. Avoid contact with skin and eyes to prevent skin irritation.
