GENERAL TYPE
Two components, polyamide cured epoxy gloss paint.

SEALBOND EPOXY FLOORING & INDUSTRIAL COATING (EFC 321G) is a two components epoxy based coating, formulated from carefully selected, highest grade, epoxy resins and curing agents, manufactured under strict quality control standards. It cures to a hard flexible surface that is abrasion resistant. It has an excellent adhesion on properly prepared substrates, such as concrete, steel and wooden surfaces. Designed for a general maintenance coating where gloss and color retention is desired.

RECOMMENDED APPLICATION

Recommended for exterior and interior painting job such as; storage tanks, marine vessels and structures, equipment for mining, chemical, textile, food, power, fertilizer, sugar and other industrial installation; concrete floor coatings in production areas, warehouse, gas
stations and other business establishments.

APPLICATION INFORMATIONS

SURFACE PREPARATION: Surfaces to be coated must be dry and free of oil, grease and other contaminants, and should be primed with a compatible primer such as SEALBOND EPOXY PRIMER CLEAR (100% SOLIDS).

MIXING & THINNING: Stir thoroughly the base component prior to the addition of the catalyst. Use of a power mixer is recommended to attain complete homogenizing of a compound. For conventional spraying, SEALBOND EPOXY REDUCER may be added at a maximum of 10-15% by volume of the paint mixture. Allow 15 minutes induction time before application.

APPLICATION: SEALBOND EFC-321G may be applied by brush, roller, conventional spray, or by airless spray equipment. To paint over a hundred previous coats, it is necessary to sand it lightly to provide a good toehold for the next coat.

CAUTION: Highly combustible. Keep away from heat and open flame. Keep containers well covered. Work areas must be adequately ventilated. Avoid prolonged breathing of vapor and repeated contact with skin.