Sealbond PU-418 F

SEALBOND PRESSURE INJECTION POLYURETHANE FOAM SYSTEM (PU-418 F) is a single component moisture cure polyurethane expandable injection foam suitable for water cut-off in wet dynamic cracks and joints.

PROCEDURE AND GUIDELINES

SURFACE PREPARATION GENERAL

• Wear adequate PPE gear and goggles at all times and follow technical data sheet and MSDS instructions.
• All surfaces must be thoroughly cleaned to remove dirt, grease, mill scale, loose rust, chalk, and any other contaminants that can reduce adhesion.
• Identify the drill holes spacing and depths.

HEALTHY & SAFETY

Avoid contact with eyes and skin and avoid breathing its vapor. This product may cause severe skin irritation after prolonged or repeated exposure. Keep containers tightly closed and store in a cool dry place

Product is for Professional use only.