SEALBOND CHLORINATED RUBBER BASE FLOORING & INDUSTRIAL COATING (CRB-178) is a single component chlorinated rubber base coating formulated from carefully selected, highest grade resins, manufactured under strict quality control standards. It cures to a hard flexible surface that is abrasion resistant. It has an excellent adhesion on properly prepared substrates, such as concrete, steel
and wooden surfaces. Designed for a general maintenance coating where gloss and color retention is desired.

RECOMMENDED APPLICATION

Recommended for exterior and interior painting job such as; basketball court, tennis court, marine vessels and structures, equipment for mining, chemical, textile, food, power, fertilizer, sugar and other industrial installation; concrete floor coatings in production areas, warehouse, gas stations and other business establishments.

APPLICATION INFORMATIONS

SURFACE PREPARATION: Surfaces to be coated must be dry and free of oil, grease and other contaminants, and should be primed with compatible primers such as SEALBOND EP-100, SEALBOND EP-1008 and SEALBOND SP-1128.

APPLICATION: SEALBOND CRB-178 may be applied by brush, roller, conventional spray, or by airless spray equipment. Stir
thoroughly and allow 15 minutes induction time before application. To paint over a hundred previous coats, it is necessary to sand it lightly to provide a good toehold for the next coat.

CAUTION: Highly combustible. Keep away from heat and open flame. Keep containers well covered. Work areas must be adequately ventilated. Avoid prolonged breathing of vapor and repeated contact with skin.

GENERAL TYPE
Two components, polyamide cured epoxy gloss paint.

SEALBOND EPOXY FLOORING & INDUSTRIAL COATING (EFC 321G) is a two components epoxy based coating, formulated from carefully selected, highest grade, epoxy resins and curing agents, manufactured under strict quality control standards. It cures to a hard flexible surface that is abrasion resistant. It has an excellent adhesion on properly prepared substrates, such as concrete, steel and wooden surfaces. Designed for a general maintenance coating where gloss and color retention is desired.

RECOMMENDED APPLICATION

Recommended for exterior and interior painting job such as; storage tanks, marine vessels and structures, equipment for mining, chemical, textile, food, power, fertilizer, sugar and other industrial installation; concrete floor coatings in production areas, warehouse, gas
stations and other business establishments.

APPLICATION INFORMATIONS

SURFACE PREPARATION: Surfaces to be coated must be dry and free of oil, grease and other contaminants, and should be primed with a compatible primer such as SEALBOND EPOXY PRIMER CLEAR (100% SOLIDS).

MIXING & THINNING: Stir thoroughly the base component prior to the addition of the catalyst. Use of a power mixer is recommended to attain complete homogenizing of a compound. For conventional spraying, SEALBOND EPOXY REDUCER may be added at a maximum of 10-15% by volume of the paint mixture. Allow 15 minutes induction time before application.

APPLICATION: SEALBOND EFC-321G may be applied by brush, roller, conventional spray, or by airless spray equipment. To paint over a hundred previous coats, it is necessary to sand it lightly to provide a good toehold for the next coat.

CAUTION: Highly combustible. Keep away from heat and open flame. Keep containers well covered. Work areas must be adequately ventilated. Avoid prolonged breathing of vapor and repeated contact with skin.

BASEKRETE MD is a four component polyurethane self leveling system. The standard thickness for BASEKRETE MD is anomina l 3-4mm. Attractive smooth matt colored floor finish.

USES:
BASEKRETE MD is formulated specifically for the food and beverage industry. To provide a good chemical resistance and hard wearing floor finish. BASEKRETE MD can be used as a protective overlay on new floor or to repair floor.

SUBSTRATE:
BASEKRETE MD is suitable for application over concrete, wood, tile or metal. Not recommended on asphalt or painted surface.

BENEFITS

• Impact resistance
• Seamless & hygienic finish, nocreviceswhere dirt and bacteria can dwell
• Temperature resistant:0C to 85C
• Excellent chemical resistance
• Easy to clean, low maintenance requirement
• High abrasion resistance
• Low odor during installation
• Smooth surface

BASEKRETE HD is a self priming, five component troweled polyurethane screed system with self-sealingfinish. The standard thickness for BASEKRETEHD is anominal6-9mm. BASEKRETEHD cures to an extremely hard, high impact resistance mortar which exhibits excellent abrasion, wear, temperature and chemical resistance.

USES:
BASEKRETE HD is formulated specifically for the food and beverage industry. To provide a superior impact and abrasion resistance with good chemical resistance and hard wearing floor finish. BASEKRETE HD can be used as a protective overlay on new floor or to repair damaged floor.

SUBSTRATE:
BASEKRETE HD is suitable for application over concrete, wood, tileormetal. Not recommended on asphalt or painted surface.

BENEFITS

• Impact resistance
• Self-sealing
• Seamless & hygienic finish, nocreviceswhere dirt and bacteria can dwell
• Temperature resistant:-45C to 120C
• Steam cleanable
• Excellent chemical resistance
• Easy to clean, low maintenance requirement
• High abrasion resistance